Filter
Top Products
Connecting to a PC or Printer
107
Folder Composition
Folders appear as follows.
Folder number
File number
JPG : Pictures
MOV : Motion pictures
The contents of each folder are:
• This unit stores up to 999 picture files in
each folder. A new folder is created after
this maximum is reached.
• To reset file and folder numbers, use
[NO.RESET] in the setup menu. (P25)
Folder numbers are updated when:
• The folder containing the picture you just
shot had a file numbered 999 in it.
• You insert a card you had been using on
another manufacturer’s camera that has a
file number 100 (e.g. 100_XXXXX,
XXXXX is the manufacturer’s name, etc.)
immediately after using a card that had a
folder numbered 100. (That is, you insert
a card with the same number, irrespective
of the manufacturer.)
• You start shooting again after using
[NO.RESET] in the setup menus (P25). (It
is recorded to a new folder that has a
number following on from the one
previous. You can also reset the folder
number to 100 by using [NO.RESET]
immediately after formatting the card
when there are no folders or pictures on
the card.)
• If the remaining battery power is
exhausted during communication, the
recorded data may be damaged. When
you connect the camera to the PC, use a
battery with sufficient battery power (P14)
or the AC a
daptor (ACA-DC4-U/J/E; opt.).
• If the remaining battery power becomes
low during communication, the alarm
beeps. In this case, stop the
communication immediately.
• While [ACCESS] is being displayed, do
not disconnect the USB connection cable.
• For Windows 2000 users: Disconnect
the USB cable before changing the
card. Changing the card while the
cable is still connected can damage
the data on the card.
• Do not use any other USB connection
cables except the supplied one.
• Refer to the operating instructions of the
PC, too.
• You can process [RAW] format files
with [Photoshop Elements 3]
(on the included CD-ROM).
About PictBridge (PTP) setting
• With Windows XP Home Edition/
Professional and Mac OS X, you can
leave the USB mode setting as
[PictBridge (PTP)].
• You can only load pictures from the
camera and cannot write them on the
card or delete them.
• When there are 1000 or more pictures on
a card, the pictures may not be imported.
DCIM 100_Leica to 999_Leica
100_Leica Pictures/Motion pictures
MISC File with DPOF or favorite
setting
PRIVATE1 Flip animation files
DCIM
MISC
PRIVATE1
100_Leica
101_Leica
999_Leica
L1000001.JPG
L1000002.JPG
L1000999.JPG
100_Leica
SD Memory
Card
MultiMedia
Card