Preparation
13
Charging the Battery with the Charger
When the camera is shipped, the battery is
not charged. Charge the battery before
use.
1
Attach the battery with attention
to the direction of the battery.
2
Connect the AC mains lead.
• The AC mains lead does not fit entirely
into the AC input terminal. A gap will
remain as shown below.
• When the [CHARGE] indicator
A lights
in green, charging starts.
• When the [CHARGE] indicator
A turns
off (in about 130 minutes), charging is
completed.
3
Detach the battery.
• After charging is completed, be sure to
disconnect the AC mains lead from the
electrical outlet.
• The battery becomes warm after use/
charge or during charge. The camera also
becomes warm during use. However, this
is not a malfunction with the camera.
• The battery will discharge if left for a long
time after charging. Recharge it.
• Use the dedicated charger and battery.
• Charge the battery with the charger
indoors.
• Do not disassemble or modify the
charger.