Motion Detection/E-mail Alerts
The Motion Detection feature will capture a short video and send it to your E-mail address
when motion is detected.
The LevelOne IP Network Camera will compare consecutive frames to detect changes caused
by the movement of large objects.
But the motion detector can also be triggered by:
• Sudden changes in the level of available light
• Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in locations where there
is good steady illumination, and the camera is mounted securely. It cannot be used outdoors
due to the sensitivity of the CMOS sensor.
To Use Motion Detection/E-mail Alert
1. Using the Web-based interface on the LevelOne IP Network Camera, select the User
screen.
2. Configure the Alerts section shown below.
Figure 18: Motion Detection/E-mail Alert
• Check the box Send E-mail Alert when Motion Detected.
• Enter the destination E-mail address in the Send to: field.
• Enter a valid E-mail address in the Show "From" as field. The SMTP (Simple Mail
Transport Protocol) Server associated with this E-mail address is used to send the mail.
• Enter a suitable Subject for the E-mail
• Save (Apply) your changes.
17