LevelOne WCS-2000 Digital Camera User Manual


 
Cameras - Camera List
The Camera List displays all LevelOne IP Network Camera you have defined. If you have
not defined any cameras, this list will be empty.
Click the Add Camera button to add a LevelOne IP Network Camera. See the following
section for further details.
Once some cameras are listed, you can select one and then use the Modify Camera, Delete
Camera and View buttons.
To view live video, select a camera and click the View button.
Recordings - Current Recordings
This panel lists all recording currently in progress, whether started directly, or by the scheduled
recording feature.
The Stop button can be used to terminate any recording currently in progress.
Adding Cameras to the Camera List
To add a camera to the Camera List, click the Add Camera button on the main screen. You will
see a screen like the example below.
The Cameras on LAN panel, on the left, displays all LevelOne IP Network Camera found
on your LAN. This list can be updated by clicking the Refresh button.
The Camera Data panel, on the right, displays the data for the selected camera.
Figure 33: Add Camera from LAN
To add a camera to the Camera List on the main screen:
1. Select a camera in the list on the left.
2. Check that the Camera Data shown on the right is correct. See below for details.
3. Click the Add button. The camera will now appear in the Camera List on the main screen.
Camera Data - LAN
Device Name
This is the default name for the LevelOne IP Network Camera, and
cannot be changed.
Description
This displays the description entered by the LevelOne IP Network
Camera Administrator.
Address
The current IP address of the LevelOne IP Network Camera.
34