Filter
Top Products
16
Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera
Placement Options
Wireless-B Internet Video Camera
Placement Options
There are three ways to place the Camera. The first way is to place the Camera horizontally on a surface, so it sits
on four small rubber feet. The second way is to stand the Camera vertically on a surface (see Figure 5-14). The
third way is to hang the Camera on a wall (see Figure 5-15). The second and third options are explained in further
detail below.
Stand Option
1. The Camera includes a Camera Desktop Stand. Insert the end opposite to the antenna into the Stand.
2. Place the Camera, and adjust its aim and focus accordingly.
Wall Mount Option
The Camera has two wall-mount slots on the opposite side of its viewer. The distance between these two slots is
80 mm (3.15 inches).
1. Determine where you want to mount the Camera. Attach two screws to the wall, so that the Switch’s wall-
mount slots line up with the two screws.
2. Maneuver the Camera so the screws are inserted into the two slots.
3. Adjust the Camera’s aim and focus accordingly.
The installation of the Wireless-B Internet Video Camera is complete. Go to “Chapter 6: Installing the
Wireless-B Internet Video Camera Viewer & Recorder Utility.”
If advanced users wish to access the Camera through its Web-based Utility, then proceed to “Chapter 8:
Using the Wireless-B Internet Video Camera Web-based Utility.”
Figure 5-14: Stand Option
Figure 5-15: Wall Mount Option