Filter
Top Products
139
Problem Symptom
Cause
Solution
The camera
will not work.
Nothing dis-
played on the
data panel or
the monitors.
The batteries are dead.
The batteries are inserted
incorrectly.
The AC adaptor is not
connected properly.
Replace batteries (p. 24).
Re-insert the batteries taking
care that the negative and pos-
itive terminals are orientated
as indicated on the inside of
the battery chamber door
(p.24).
Check that the adaptor is con-
nected to the camera and a
live electrical outlet (p. 26).
TROUBLESHOOTING
The section covers minor problems with basic camera operation. For major problems or
damage, or if a problem continues to re-occur frequently, contact a Minolta service facil-
ity listed on the back cover of this manual.
“Err” displayed
on the data
panel
The camera is hot or it
has been left ina very hot
environment.
Turn off the camera and allow
it to cool. If “Err” is still dis-
played on the camera after it
cools, remove and replace the
batteries or power cord.
Shutter will
not release.
“000” is dis-
played on the
frame counter.
CompactFlash card is full
and unable to store an
image at the image-quali-
ty or image-size setting
on the camera.
Insert a new CompactFlash
card (p. 26), delete some
images (p. 102), or change the
image-quality or image-size
setting (p.40).