Filter
Top Products
76
RECORDING MODE
FLASH MODES
Data
panel
EVF &
LCD monitor
–
–
Fill-flash
Red-eye
reduction
Rear flash
sync
Used in low-light conditions and to
reduce shadows under direct sunlight.
To reduce the red-eye effect with flash
photographs of people and animals
Flash fires at the end of long exposures.
The flash mode can be changed in the basic section of the recording-mode menu (p.
80). For the flash to fire, the unit must be manually lifted. The flash will fire in the
selected mode regardless of the amount of ambient light. When the flash is used, the
camera sensitivity is automatically set at ISO 200. This setting can be changed using
the function dial (p. 40). The auto-white-balance setting will give priority to the flashes
colour temperature. If manual white-balance settings are used, priority is given to the
active settings colour temperature (p. 59).
Fill-flash can be used as the main or
supplementary light. In low-light
conditions, the flash will act as the
main source of illumination and
overpower the ambient light. Under
strong sunlight or in backlit situations,
the fill-flash can reduce harsh
shadows.
FILL FLASH