Filter
Top Products
English
6. USING THE TERMINAL PROPERTIES
83
83
Modifying the settings
This enables to delete printer settings when a printer is connected to the LPT1 port.
1. Select LPT1 and click [Properties...].
2. “Printer Properties” dialog box is displayed.
Change the settings as needed.
[F
riendly Name] .................Changes the printer's name. (If you are naming the
printer, the name combination must be 31 character or
less.)
[M
anufacture]
[P
rinters].............................Change the Manufacture and the model name of the
printer. If the printer is not on the list, please select
the compatible printer. See the printer's instruction
manual.
[Make this the d
efault printer]
...................................Sets/cancels setting the printer as a default. (The 630L
corresponds to only LPT1 port, and only one printer
at a time can be installed. The installed printer will be
always the default printer.)
Click [OK] to return to the “Terminal Properties” dialog box.
Click [OK] in the “Terminal Properties” dialog box to save the settings and close the
“Terminal Properties” dialog box.