Filter
Top Products
English
6. USING THE TERMINAL PROPERTIES
93
93
Date/Time Settings
Configure the date/time properties of the 630L.
NOTE
• The settings are referred when the client time zone function of the ICA protocol is
effective.
• Date and time will return to the default settings if the power cord is unplugged.
1. Double-click the “Date/Time” icon.
2. “Date/Time Properties” is displayed.
[Date/Time] Tab.................Set date, current time, or time zone. During daylight
saving time, click the [Daylight savings time currently
in effect] check box.
[NTP Server] Tab ...............Synchronize time with the NTP Server.
Select when to synchronize time with the NTP server
(on every boot up or every time clicking the
[Synchronize] button.)
NOTE
• Synchronizing time at startup is effective when the 630L is connecting
WTS/Web Server using a network connector on the rear.
• Getting the NTP Server information from the DHCP Server needs to satisfy the
following:
* Connect the WTS/Web Server by the network connector on the rear
* Use the DHCP Server to get information such as IP address.
* Set the NTP Server option at the DHCP Server.
Click [OK] to return to the “Terminal Properties” dialog box.
Click [OK] of the “Terminal Properties” to close the “Terminal Properties” and
save the settings.