Filter
Top Products
173
Sharing Custom Picture Controls
Use the Load/save option in the Manage Picture Control menu
to copy custom Picture Controls to and from memory cards.
Custom Picture Controls can be created on a computer using
Picture Control Utility 2, a utility launched from ViewNX 2
(supplied) or Capture NX-D (0 268), then saved to a memory
card and copied to the camera.
Custom Picture Controls created
on the camera can be copied to a memory card for use in other
D750s.
Once the copies are no longer needed, they can be
deleted using the Delete from card option.
To copy custom Picture Controls to or
from the memory card, or to delete
custom Picture Controls from the
memory card, highlight Load/save in the
Manage Picture Control menu and
press 2.
The following options will be
displayed:
• Copy to camera: Copy custom Picture Controls from the memory
card to custom Picture Controls C-1 through C-9 on the
camera and name them as desired.
• Delete from card: Delete selected custom
Picture Controls from the memory
card.
The confirmation dialog shown
at right will be displayed before a
Picture Control is deleted; to delete
the selected Picture Control, highlight
Yes and press J.
• Copy to card: Copy a custom Picture Control (C-1 through C-9)
from the camera to a selected destination (1 through 99) on
the memory card.