Filter
Top Products
239
The GP-1/GP-1A GPS unit (available separately) can be
connected to the camera’s accessory terminal (0 443) using the
cable supplied with the GP-1/GP-1A, allowing information on
the camera’s current position to be recorded when photographs
are taken.
Turn the camera off before connecting the GP-1/
GP-1A; for more information, see the GP-1/GP-1A manual.
❚❚ Setup Menu Options
The Location data item in the setup menu contains the options
listed below.
• Standby timer: Choose whether the exposure meters turn off
automatically when the GP-1/GP-1A is attached.
• Position: This item is only available if the GP-1/GP-1A is
connected, when it displays the current latitude, longitude,
altitude, and Coordinated Universal Time (UTC) as reported by
the GP-1/GP-1A.
• Set clock from satellite: Select Yes to synchronize the camera
clock with the time reported by the GPS device.
Location Data
Option Description
Enable
Exposure meters turn off automatically if no operations
are performed for the period specified in Custom Setting
c2 (Standby timer, 0 336; to allow the camera time to
acquire location data, the delay is extended by up to one
minute after the exposure meters are activated or the
camera is turned on).
This reduces the drain on the
battery.
Disable
Exposure meters do not turn off while the GP-1/GP-1A is
connected.