Nikon 26277 Camcorder User Manual


 
E2
Reference Section
Reference Section
Using Panorama Assist
The camera focuses on the subject in the center of the frame. Use a tripod for the
best results. Set Vibration reduction (E61) to Off in the setup menu when
using a tripod to stabilize the camera.
1 Press the A button in shooting
mode and use the multi selector
to select p (Panorama assist)
scene mode (A 39).
Panorama direction icons are displayed
to show the direction in which images
will be joined.
2 Use the multi selector to select the direction
and press the k
button.
Select the direction in which images will be joined in
the completed panorama; right (I), left (J), up (K), or
down (L).
The yellow panorama direction icon (II) is displayed
for the current direction and the direction is fixed when
the k button is pressed. The icon changes to the white fixed direction I icon.
If necessary, apply flash mode (A 56), self-timer (A58), macro mode (A 59), and
exposure compensation (A 60) settings with this step.
Press the k button again to select a different direction.
3 Frame the first portion of the
panorama scene and take the first
picture.
One third of the image will be displayed as
translucent.
4 Take the next picture.
Frame the next image so that one third of
the frame overlaps the first image, and
press the shutter-release button.
Repeat this process until the necessary
number of images has been taken to
complete the scene.
Panorama assist
76 0
760
29 m 0s
29m 0s
F3.2
F3.2
1/ 25 0
1/250
75 9
759
29 m 0s
29m 0s
End
End
End