Nikon 26277 Camcorder User Manual


 
E31
The Shooting Menu (for A (Auto) Mode)
Reference Section
Using Preset Manual
Preset manual is used with mixed lighting or to compensate for light sources with a
strong color cast when the desired effect has not been achieved with white balance
settings like Auto and Incandescent (for example, to make images shot under a
lamp with a red shade look as though they had been shot under white light).
Use the procedure below to measure the white balance value under the lighting
used during shooting.
1 Place a white or gray reference object under the lighting that will be
used during shooting.
2 Display the shooting menu (A 10, 37), use
the multi selector to select b Preset manual
in the White balance menu, and press the k
button.
The camera zooms in to the position for measuring
white balance.
3 Select Measure.
To apply the most recently measured white balance
value, select Cancel and press the k button. The
white balance setting will not be measured again and
the most recently measured value will be set.
4 Frame the reference object in the measuring
window.
5 Press the k button to measure a value for preset manual.
The shutter is released and the new white-balance value is set. No image is saved.
Preset manual
Incandescent
Incandescent
Incandescent
Fluorescent
Fluorescent
Fluorescent
Cloudy
Cloudy
Cloudy
Daylight
Daylight
Daylight
Auto
Auto
Flash
Flash
Flash
White balance
Preset manual
Cancel
Measure
Preset manual
Cancel
Measure
Measuring window
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.