Nikon 26418B Digital Camera User Manual


 
95
Connecting the Smart Device to the Camera
Using the Wi-Fi (Wireless LAN) Feature (COOLPIX S9500 only)
To Terminate the Wi-Fi Connection
Turn off the camera.
Set the Wi-Fi setting on the smart device to Off.
B Notes on Wi-Fi Connection
Set the Wi-Fi network to Off in a place where the use of radio waves is prohibited.
When a memory card is not inserted in the camera, the Wi-Fi feature cannot be used. When Eye-Fi
card (E85) is inserted in the camera, the Wi-Fi feature cannot be used.
When Wi-Fi is connected, Auto off is disabled.
When the Wi-Fi network is set to On, the battery will drain faster than normal.
The Wi-Fi network cannot be selected when the battery level indicator in the monitor indicates
B. In addition, if the battery level indicator indicates B while a Wi-Fi connection is established,
the connection is terminated.
C Note on Security Settings
If the camera is installed with the Wi-Fi feature without proper security settings (encryption and
password), unauthorized third parties may access the network and cause harm. We strongly
recommend performing the required security settings before using the Wi-Fi feature.
Use Wi-Fi options of the setup menu (A96) to perform the security settings.