Filter
Top Products
58
Features That Can Be Set Using the Multi Selector
Shooting Features
Adjusting Brightness (Exposure Compensation)
When the shooting mode is set to scene mode, smart portrait mode or special
effects mode, you can adjust the brightness (exposure compensation).
1 Press K (o exposure compensation) on the
multi selector.
2 Press the multi selector H or I to select a
compensation value.
3 Press the k button.
• If the k button is not pressed within a few seconds, the selection is set and the
setting menu disappears.
• Even when the shutter-release button is pressed without pressing the k button, a
picture can be shot using the selected compensation value.
• When an exposure compensation value other than 0.0 is applied, the value is
displayed with the H icon on the monitor screen.
4 Press the shutter-release button to take a
picture.
• To turn off exposure compensation, return to step 1,
and change the value to 0.0.
C Exposure Compensation Value
• When the shooting mode is the Fireworks show (A40) in scene mode, the exposure
compensation cannot be used.
• When the exposure compensation is set while using a flash, the compensation is applied to both
the background exposure and to the flash output.
C Histogram
See “Using the Histogram” (A57) for more information.
Setting Explanation
“+“ side
Make the subject brighter than the
exposure set by the camera.
“-“ side
Make the subject darker than the
exposure set by the camera.
“0.0“
Cancel the exposure compensation.
Exposure compensation
+ 0.3
+ 2.0
- 2.0
Exposure
compensation guide
Exposure
compensation value
Histogram
29m 0s29m 0s29m 0s
970970970