Nikon 26474 Digital Camera User Manual


 
139
Using Menus
Eye-Fi Upload
Set whether or not to enable the function for sending images to a computer
using a commercially available Eye-Fi card.
This setting cannot be selected while Wi-Fi is connected.
B Notes About Eye-Fi Cards
Note that images will not be uploaded if signal strength is insufficient even if
Enable is selected.
Remove your Eye-Fi card from the camera in areas where the use of radio waves is
prohibited. Eye-Fi cards may emit wireless signals when Disable is selected.
Refer to the instruction manual of your Eye-Fi card for more information. In the
event of malfunction, or if you have any inquiries, contact the card manufacturer.
The camera can be used to turn Eye-Fi cards on and off, but may not support other
Eye-Fi functions.
The camera is not compatible with the Endless Memory function. When it is set on
a computer, disable the function. If the Endless Memory function is enabled, the
number of images captured may not be displayed correctly.
Eye-Fi cards are for use only in the country of purchase. Observe all local laws
concerning wireless devices.
Leaving the setting as Enable will result in the battery being depleted in a shorter
period of time.
C Eye-Fi Communication Indicator
The communication status of the Eye-Fi card in the camera can be confirmed in the
monitor (A6).
w: Eye-Fi upload is set to Disable.
x (lights): Eye-Fi upload enabled; waiting to begin upload.
x (flashes): Eye-Fi upload enabled; uploading data.
y: Eye-Fi upload enabled; no images available for upload.
z: An error occurred. The camera cannot control the Eye-Fi card.
Tap F M z menu icon M Eye-Fi upload
Option Description
b Enable
(default setting)
Upload images created by the camera to a
preselected destination.
c Disable Images are not uploaded.