Nikon 26474 Digital Camera User Manual


 
77
Playback Features
Selective Softening: Blurring the Background
1 Use I to draw a border line
around the area that you do not
want to blur.
When the border line is connected at the
start and end points, the area is recognized
as a selection area. The inside of the
selection area is displayed in color, and the
outside is blurred.
A selection area cannot be specified if the line is not properly connected or if
the specified area is too narrow. Draw the border line again.
2 Adjust the selection area.
Tap I to make an additional selection
area.
Tap J to erase a selection area.
Tap e to undo the previous action (up to
five times).
You can zoom in on images by moving the
zoom control toward g (i). Tap
ABCD to scroll to the portion of the image that you want to display.
Move the zoom control toward f(h) to return to the original screen size.
When you finish making adjustments, tap I.
3 Tap or drag the slider to select the
amount of effect, and tap I.
Tap e to undo the selection area.
To exit without saving the edited image,
tap y.
4 Tap Yes.
An edited copy is created.
Enter playback mode M select an image M tap F M V Selective
softening
Select area
Select area
Amount