Nikon 26498 Digital Camera User Manual


 
Reference Section
E40
B Notes About Log Recording
If the date and time are not set, the log cannot be recorded.
Use a fully charged battery to prevent the camera from turning off during log
recording. When the battery power becomes exhausted, log recording ends.
Even when the camera is turned off, log recording is continuously performed until
the preset time has elapsed if there is still time remaining for log recording.
Log recording ends due to the operations below even when there is time
remaining for log recording.
- The battery is removed
- Record location data in Location data options is set to Off
- Reset all in the setup menu is performed
- The setting of the internal clock (time zone or date and time) is changed
- End log is selected in Create log (E39) of the Location data options menu
Log recording is paused during the operations below.
- During continuous shooting
- During movie recording
- When connected with a USB cable or HDMI cable
Log recording is resumed when the above operations are finished.
The log data cannot be recorded when positioning cannot be performed at all
during log recording.
The log data is temporarily stored in the camera. New logs cannot be recorded if
the log data remains in the camera. After recording log data, save it to a memory
card (E41).
See “Log Data Saved on Memory Cards” (E111) for more information.