Filter
Top Products
E93
Reference Section
Configure the Wi-Fi (wireless LAN) settings to connect the camera and a smart
device.
The Wi-Fi Options Menu
Press the d button M q menu icon M k button
Option Description
Connect to smart
device
Select when wirelessly connecting the camera and a smart
device. See “Connecting to a Smart Device (Wi-Fi)” (E50)
for more information.
Upload from camera
Select when wirelessly connecting the camera and a smart
device. See “Preselecting Images in the Camera That You
Want to Transfer to a Smart Device” (E52) for more
information.
• The images to transfer can be selected on the image
selection screen before establishing a Wi-Fi connection
(A53, E82). The SSID and password of the camera
are displayed on the screen after images are selected.
Disable Wi-Fi
Select to terminate the wireless connection between the
camera and a smart device. See “To Terminate the Wi-Fi
Connection” (E51) for more information.
Options
SSID: Change the SSID. The SSID configured here is
displayed on the smart device. Set a 1- to 24-character
alphanumeric SSID.
Auth./encryp.: Select whether or not to encrypt the
communications between the camera and the connected
smart device.
Communications are not encrypted when Open (default
setting) is selected.
• When WPA2-PSK-AES is set, the message for entering
a password is displayed when the camera is connected
to smart device (E50).
Password: Set the password. Set an 8- to 16-character
alphanumeric password.
Channel: Select the channel used for wireless
connections.
Subnet mask: Use the default setting (255.255.255.0)
under normal conditions.
DHCP server IP address: Use the default setting
(192.168.0.10) under normal conditions.