Nikon 26498 Digital Camera User Manual


 
8
Preparing for Shooting
1 With the battery installed, connect the camera to an
electrical outlet.
If a plug adapter* is included with your camera, securely connect it to the
Charging AC Adapter. Once the two are connected, attempting to forcibly
remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or region in
which the camera was purchased.
This step can be omitted if the plug adapter comes permanently bonded to
the Charging AC Adapter.
The charge lamp slowly flashes green to indicate that the battery is charging.
When charging is complete, the charge lamp turns off. It takes about 2 hour
and 20 minutes to charge a fully exhausted battery.
The battery cannot be charged when the charge lamp quickly flashes green,
possibly due to one of the reasons described below.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
2 Disconnect the Charging AC Adapter from the electrical
outlet and then disconnect the USB cable.
Charge the Battery
Charge lamp
Electrical outlet
USB cable (included)
Charging AC Adapter