Filter
Top Products
Reference Section
E6
• The shutter speed is fixed at about four seconds.
• The zoom is restricted to 10 fixed positions.
• On the screen displayed when o Backlighting is selected, select On or Off of
HDR (high dynamic range) composition based on the type of image you want to
capture.
• Off (default setting): The flash fires to prevent the subject from being hidden in
shadow.
- When the shutter-release button is pressed all the way down, one image is
captured.
• On: Use when taking pictures with very bright and dark areas in the same frame.
- When the shutter-release button is pressed all the way, the camera shoots
images continuously at high speed, and saves the following two images.
- A non-HDR composite image
- An HDR composite image in which the loss of details in highlights or shadows
is minimized
- If there is only enough memory to save one image, an image processed by D-
Lighting (E27) at the time of shooting, in which dark areas of the image are
corrected, is the only image saved.
- Once the shutter-release button is pressed all the way, hold the camera still until
a still image is displayed. After taking a picture, do not turn the camera off before
the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
y M m Fireworks show
y M o Backlighting