Filter
Top Products
213
t
❚❚Interrupting Interval Timer Photography
Interval timer shooting will end automatically if the battery is
exhausted.
Interval timer photography can also be ended by:
•Selecting Start > Off in the interval timer menu
• Performing a two button reset (0 200)
•Selecting Reset shooting menu in the shooting menu (0 287)
• Changing bracketing settings (0 136)
Normal shooting will resume when interval timer photography ends.
❚❚No Photograph
Photographs will not be taken if the previous photograph has yet
to be taken, the memory buffer or memory card is full, or the
camera is unable to focus in single-servo AF (note that the camera
focuses again before each shot).
A Release Mode
Regardless of the release mode selected, the camera will take the
specified number of shots at each interval.
In CH (continuous high
speed) mode, photographs will be taken at a rate of up to nine shots per
second, or, if DX (24×16) is selected for Image area, at the frame rate
selected for Custom Setting d2 (Shooting speed; 0 307) > Continuous
high-speed.
In S (single frame) and CL (continuous low-speed) modes,
photographs will be taken at the rate chosen for Custom Setting d2
(Shooting speed, 0 307) > Continuous low-speed; in mode J,
camera noise will be reduced.
A Shooting Menu Banks
Changes to interval timer settings apply to all shooting menu banks
(0 285).
If shooting menu settings are reset using the Reset shooting
menu item in the shooting menu (0 287), interval timer settings will be
reset as follows:
•Choose start time: Now
• Interval: 00:01':00"
• Number of intervals: 1
• Number of shots: 1
• Start shooting: Off