Filter
Top Products
304
U
When calculating exposure, center-weighted
metering assigns the greatest weight to a
circle in the center of the frame.
The
diameter (φ) of this circle can be set to 8, 12,
15, or 20 mm or to the average of the entire
frame.
Note that unless Average is selected, the diameter is fixed at
12 mm when a non-CPU lens is used, regardless of the setting
selected for Non-CPU lens data in the setup menu (
0 214). When
Average is selected, the average of the entire frame will be used for
both CPU and non-CPU lenses.
Use this option to fine-tune the exposure
value selected by the camera.
Exposure can
be fine tuned separately for each metering
method by from +1 to –1 EV in steps of
1
/6 EV.
b5: Center-Weighted Area
G button ➜ ACustom Settings menu
b6: Fine Tune Optimal Exposure
G button ➜ ACustom Settings menu
D Fine-Tuning Exposure
Exposure can be fine-tuned separately for each Custom Settings bank
and is not affected by two-button resets.
Note that as the exposure
compensation (E) icon is not displayed, the only way to determine how
much exposure has been altered is to view the amount in the fine-
tuning menu.
Exposure compensation (0 134) is preferred in most
situations.