Filter
Top Products
38
s
4 Close the card slot cover.
If this is the first time the memory card
will be used after being used or
formatted in another device, format the
card as described on page 39.
❚❚Removing Memory Cards
1 Turn the camera off.
Confirm that the access lamp is off and
turn the camera off.
2 Remove the memory card.
Open the memory card slot cover (q)
and press the eject button (w) to
partially eject the card (e). The memory
card can then be removed by hand. Do
not push on the memory card while
pressing the eject button. Failure to observe this precaution
could damage the camera or memory card.
D Inserting Memory Cards
Insert the memory card terminals first.
Inserting the card upside down or backwards
could damage the camera or the card.
Check to
be sure that the card is in the correct
orientation.
4
GB
Direction of
insertion
Terminals
Rear label
Access lamp