Filter
Top Products
324
U
Selecting Ye s allows adjustments that are normally made by
holding the I, E, D, M, ISO, QUAL, or WB button and rotating a
command dial to be made by rotating the command dial after the
button is released.
Setting ends when any of the affected buttons
is pressed again or the shutter-release button is pressed halfway.
Except when No limit is selected for Custom Setting c2 Auto
meter-off delay, setting will also end when the exposure meters
turn off.
Selecting Enable release allows the shutter to be released when
no memory card is inserted, although no pictures will be recorded
(they will however be displayed in the monitor in demo mode).
If
Release locked is selected, the shutter-release button is only
enabled when a memory card is inserted in the camera.
If (V) is selected, the exposure indicators in the
top control panel and information display are displayed with
positive values on the left and negative values on the right.
Select
(W) to display negative values on the left and
positive values on the right.
f9: Release Button to Use Dial
G button ➜ ACustom Settings menu
f10: No Memory Card?
G button ➜ ACustom Settings menu
f11: Reverse Indicators
G button ➜ ACustom Settings menu