Filter
Top Products
220
t
❚❚Setup Menu Options
The GPS item in the setup menu contains the options listed below.
• Auto meter off: Choose whether or not the exposure meters will
turn off automatically when a GPS unit is attached.
• Position: This item is only available if a GPS
device is connected, when it displays the
current latitude, longitude, altitude,
Coordinated Universal Time (UTC), and
heading (if supported) as reported by the
GPS device.
• Use GPS to set camera clock: Select No to set the camera clock
independently of the GPS device.
Note that when Ye s is
selected, the time will automatically be adjusted according to
the date format, time zone, and daylight savings time options
selected in the Time zone and date menu (0 34, 330).
Option Description
Enable
Exposure meters will turn off automatically if no operations
are performed for the period specified in Custom Setting c2
(Auto meter-off delay; to allow the camera time to acquire
GPS data, the delay is extended by up to one minute after
exposure meters are activated or the camera is turned on).
This reduces the drain on the battery.
Disable
Exposure meters will not turn off while a GPS unit is
connected; GPS data will always be recorded.