Filter
Top Products
386
n
Replacing the Clock Battery
The camera clock is powered by a CR1616 lithium battery with a life
of about four years.
If the B icon is displayed in the top control
panel while the exposure meters are on, the battery is running low
and needs to be replaced.
When the battery is exhausted, the B
icon will blink while the exposure meters are on.
Photographs can
still be taken but will not be stamped with the correct time and
date, and interval timer photography will not function correctly.
Replace the battery as described below.
1 Remove the main battery.
The clock battery chamber is located on the roof of the main
battery chamber.
Turn the camera off and remove the EN-EL4a
battery.
2 Open the clock battery chamber.
Slide the clock battery chamber cover
toward the front of the main battery
chamber.
3 Remove the clock battery.
4 Insert the replacement battery.
Insert a new CR1616 lithium battery so
that the positive side (the side marked
with “+” and the battery name) is visible.