Filter
Top Products
229
Q
Wireless and Ethernet Networks
If the optional WT-4 wireless transmitter is attached, photographs
can be transferred or printed over wireless or Ethernet networks
and the camera can also be controlled from network computers
running Camera Control Pro 2 (available separately).
The WT-4 can
be used in any of the following modes:
For more information, see the WT-4 user’s manual.
Be sure to
update to the latest versions of the WT-4 firmware and supplied
software.
D USB
Select [MTP/PTP] for the camera [USB] option before connecting a WT-4
wireless transmitter.
D Transfer Mode
When [Wireless transmitter] > [Mode] > [Transfer mode] is selected in the
camera setup menu, the J button is used during playback to select
pictures for upload, preventing it from being used to select pictures for
other operations, such as side-by-side comparison (pg. 342).
To restore
normal operation, select another option for [Wireless transmitter] >
[Mode].
A WT-4A/B/C/D/E
The principal difference between the WT-4 and WT-4A/B/C/D/E is in the
number of channels supported; unless otherwise stated, all references to
the WT-4 also apply to the WT-4A/B/C/D/E.
Mode Function
Transfer mode
Upload new or existing photographs to computer or ftp
server.
Thumbnail
select mode
Preview photographs on computer monitor before
upload.
PC mode
Control camera from computer using Camera Control
Pro 2 (available separately).
Print mode
Print JPEG photographs on printer connected to
network computer.