Nikon 920162 Digital Camera User Manual


 
412
n
Exposure bracketing 2–9 frames in steps of
1
/3,
1
/2,
2
/3, or 1 EV
Flash bracketing 2–9 frames in steps of
1
/3,
1
/2,
2
/3, or 1 EV
White balance
bracketing
2–9 frames in steps of 1, 2, or 3
Exposure lock Luminosity locked at detected value with AE-L/AF-L
button
ISO sensitivity
(Recommended
Exposure Index)
ISO 200 – 3200 in steps of
1
/3,
1
/2, or 1 EV .
Can also be
set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 100 equivalent)
below ISO 200 or to approx. 0.3, 0.5, 0.7, or 1 EV (ISO
6400 equivalent) above ISO 3200.
Active D-Lighting Can be selected from [High], [Normal], or [Low]
Focus
Autofocus Nikon Multi-CAM 3500DX autofocus sensor module
with TTL phase detection, fine-tuning, 51 focus points
(including 15 cross-type sensors), and AF-assist
illuminator (range approx. 0.5–3m/1 ft. 8 in.–9 ft.
10 in.)
Detection range –1 – +19 EV (ISO 100, 20 °C/68 °F)
Lens servo Autofocus: Single-servo AF (S); continuous-servo AF (C);
predictive focus tracking automatically activated
according to subject status
Manual (M): Electronic range finding supported
Focus point Can be selected from 51 or 11 focus points
AF-area mode Single-point AF, dynamic-area AF, auto-area AF
Focus lock Focus can be locked by pressing shutter-release
button halfway (single-servo AF) or by pressing AE-L/
AF-L button
Flash
Built-in flash Manual pop-up with button release and a Guide
Number of 17/56 (m/ft, ISO 200, 20 °C/68 °F; GN at ISO
100 is 12/39) or 18/59 in manual mode (m/ft, ISO 200,
20 °C/68 °F; GN at ISO 100 is 13/43)
Exposure