Nikon 920162 Digital Camera User Manual


 
369
n
Remote
terminal
accessories
The D300 is equipped with a ten-
pin remote terminal for remote
control and automatic
photography.
The terminal is
provided with a cap, which protects
the contacts when the terminal is
not in use.
The following
accessories can be used (all lengths are approximate):
Remote Cord MC-22: Remote shutter release with blue,
yellow, and black terminals for connection to a remote
shutter-triggering device, allowing control via sound or
electronic signals (length 1 m/3 ft. 3 in.).
Remote Cord MC-30: Remote shutter release; can be used to
reduce camera shake or keep the shutter open during a
time exposure (length 80 cm/2 ft. 7 in.).
Remote Cord MC-36: Remote shutter release; can be used for
interval timer photography or to reduce camera shake or
keep the shutter open during a time exposure. Equipped
with back-lit control panel, shutter-release lock for use in
bulb photography, and timer that beeps at one-second
intervals (length 85 cm/2 ft. 9 in.).
Extension Cord MC-21: Can be connected to ML-3 or
MC-series 20, 22, 23, 25, 30, or 36. Only one MC-21 can be
used at a time (length 3 m/9 ft. 10 in.).
Connecting Cord MC-23: Connects two cameras for
simultaneous operation (length 40 cm/1 ft. 4 in.).