43
s
Adjust Viewfinder Focus
The camera is equipped with diopter adjustment to accommodate
individual differences in vision.
Check that the display in the
viewfinder is in focus before shooting.
1 Turn the camera on.
Remove the lens cap and turn
the camera on.
2 Focus the viewfinder.
Rotate the diopter control
until the viewfinder display,
focus points, and AF area
brackets are in sharp focus.
When operating the diopter
control with your eye to the
viewfinder, be careful not to
put your fingers or fingernails
in your eye.
A Adjusting Viewfinder Focus
If you are unable to focus the viewfinder as described above, select single-
point AF (K) and rotate the focus mode selector to S, then frame a high-
contrast subject in the center focus point and focus using autofocus.
With
the camera in focus, rotate the diopter control until the subject is clearly
focused in the viewfinder.
If necessary, viewfinder focus can be further
adjusted using optional corrective lenses (pg. 366).
Power switch