Filter
Top Products
Modifying data loading options
Data loading options can be modified when no shooting data is stored in the camera's
memory and the film counter displays
"E".
The modified data loading options will be
applied when the next roll of film is loaded and advanced to the first frame.
1.
On the F100 Shooting Data dialog box, select "Memorize shooting data" to store
data or "Not memorize shooting data" to stop storing shooting data. ("Not memo-
rize shooting data" is the default setting.)
2.
If you have selected "Memorize shooting data", then select Simple mode or
Detailed mode .
3. You can choose to "Delete old data" or "Cancel shooting data memorization"
when the camera's memory is
full.
("Delete
old data" is the default setting.)
4.
Click "Modify" to modify the data loading options on the camera body, as selected
in the dialog box.
• For details, see the help message for the F100 Shooting Data dialog box.
F100 shooting data to be stored and data storage capacity:
Type of data
to be stored
Simple mode
Detailed mode
Shooting data items
Shutter speed, aperture, focal length set on the lens,
frame counter, with or without Speedlight/
TTL auto flash, Multiple exposure
All Simple mode items plus: lens' focal length,
maximum aperture, metering system, exposure mode,
flash sync mode, deviation from the correct exposure
value and exposure compensation value in manual
mode,
flash output level compensation value
Data storage capacity
(no.
of rolls of film)
Approx. 70
Approx. 30
* When using 36-exposure
film.
Data storage capacity varies according to the
number of frames shot.
23