Filter
Top Products
With the F90/F90X (N90/N90s)
1.
Using the MC-31
cord,
connect the F90/F90X (N90/N90s) camera to a personal
computer.
2.
Turn on both the camera and personal computer.
3. Start Photo Secretary, click
"Tool"
and "F90/F90X (N90/N90s) Shooting Data" to
activate the F90/F90X (N90/N90s) Shooting Data dialog box. (Fig. 26)
, f Cancel storage of shooting data
<~ Store minimum shooting data Modify J
*"* State medium shooting data
f* n I t 2 J 's
I
Options with full data <
Close
•
ff
Turn the power switch to OFF then to ON •—->
f Download stored data
(Fig.
26)
The F90/F90X (N90/N90s) Shooting Data dialog box allows you to:
• Confirm data loading options set on the F90/F90X (N90/N90s) camera body.
• Modify data loading options as desired and set them on the camera body.
• Download shooting data from the F90/F90X (N90/N90s) camera's memory.
• Delete shooting data from the F90/F90X (N90/N90s) camera's memory.
Confirming data loading options
You can confirm the data loading options set on the F90/F90X (N90/N90s) camera
body.
On the F90/F90X (N90/N90s) Shooting Data dialog box, click "Confirm" so that the
dialog box shows data loading options set on the F90/F90X (N90/N90s) camera
body.
?9