Filter
Top Products
Modifying data loading options
Data loading options can be modified only when no shooting data is stored in the
camera's memory and the film counter shows "E". The modified data loading options
will be activated after you load a new roll of film and it advances to the first frame.
1.
On the F90/F90X (N90/N90s) Shooting Data dialog box, select one of the four
memory modes: "Cancel storage of shooting data," "Store minimum shooting
data",
"Store medium shooting data", and "Store maximum shooting data".
("Cancel storage of shooting data" is the default setting.)
2.
Select one of the following options: "Turn power switch OFF then ON" or
"Download stored data".
("Turn
power switch OFF then ON" is the default setting.)
3. Click "Modify" to modify the data loading options on the camera body, as selected
in the dialog box.
• For details, see the help message for the F90/F90X (N90/N90s) Shooting Data dia-
log box.
F90/F90X (N90/N90s) shooting data to be stored and data storing capacity:
Type of data
to be stored
Minimum data
Medium data
Maximum data
Shooting data items
Shutter
speed,
aperture
"Minimum data" items plus metering system,
exposure mode, flash sync mode, focal length set
on the lens
"Medium data" items plus exposure
compensation value, flash output level
compensation value
Data storing capacity
(no.
of rolls of film)
F90/N90
Approx. 5
Approx. 3
Approx. 2
F90X/N90S
Approx. 99
Approx. 50
Approx. 34
* When using 36-exposure
film.
Data storage capacity varies according to the
number of frames shot and/or if multiple exposure shooting is conducted.
Downloading shooting data from the F90/F90X (N90/N90s) camera body
1.
On the F90/F90X (N90/N90s) Shooting Data dialog box, click "Load" to activate
the Data Loading dialog box. (Fig. 27)
(Fig.
27)
30