Filter
Top Products
E25
Connecting the Camera to a Printer (Direct Print)
Reference Section
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
• Check the printer settings.
3 Connect the camera to the printer using the included USB cable.
• Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull
the plug at an angle.
4 Turn on the camera.
• When connected correctly, the PictBridge startup
screen (1) is displayed on the camera monitor. Then
the Print selection screen (2) is displayed.
32
32
NO.
Print selection
2011
15/11
12