Filter
Top Products
20
First Steps
Inserting Memory Cards
Image, sound, and movie files are saved in the camera’s internal memory
(approximately 32 MB) or on removable Secure Digital (SD) memory cards
(commercially available; A 145).
If a memory card is inserted in the camera, data are automatically saved on
the memory card and data saved to the memory card can be played back,
deleted, or transferred. Remove the memory card to save data in the internal
memory, or play back, delete, or transfer data from the internal memory.
1 Be sure that the power-on lamp and the
monitor are off and open the battery-
chamber/memory card slot cover.
Be sure to turn off the camera before opening the cover.
2 Insert the memory card.
Slide the memory card in until it clicks
into place.
B Inserting Memory Cards
Inserting the memory card upside down
or backwards could damage the camera
or the memory card. Be sure to check that
the memory card is in the correct
orientation.
3 Close the battery-chamber/memory card slot cover.
Removing Memory Cards
Turn the camera off and be sure that the power-on
lamp and the monitor have turned off before opening
the battery-chamber/memory card slot cover.
Press the card in (1) to partially eject the card, then
remove the card by hand while being careful not to
remove the card at an angle (2).
• Note that the battery and memory card may
become hot during use; observe caution when removing the battery or
memory card.
Memory card slot