Filter
Top Products
Technical Notes
104
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution
A
Battery temperature is
elevated. The camera
will turn off.
The camera turns off automatically. Wait until
the camera or battery temperature has
cooled before resuming use.
–
The camera will turn off
to prevent overheating.
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write”
position.
–
This card cannot be
used.
An error occurred while accessing the
memory card.
• Use an approved memory card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly
inserted.
7, 120
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for
use in the camera.
Formatting deletes all data saved on the
memory card. If you need to keep copies of
any images, make sure to press flexible
button 4 (S No) and save the copies to a
computer or other medium before
formatting the memory card. Press flexible
button 3 (R Yes) to format the memory card.
102
Out of memory. Delete images or insert a new memory card. 7, 18
Image cannot be saved.
An error occurred while saving the image.
Insert a new memory card or format the
memory card or internal memory.
85
The camera has run out of file numbers.
Insert a new memory card or format the
memory card or internal memory.
85
There is insufficient space to save the copy.
Delete images from the destination.
18
No further pictures can
be graded.
200 images have already been graded or
added to favorites.
Remove some grades or remove some
images from favorites.
59, 61,
63, 65
Album is full. No further
pictures can be added.