Filter
Top Products
7
Preparing for Shooting
Preparing for Shooting
1 Open the battery-chamber/memory card slot cover, and
then insert the battery and memory card.
• With the battery’s positive and negative terminals oriented correctly, move
the orange battery latch (4), and fully insert the battery (5).
• Slide the memory card in until it clicks into place (6).
• Be careful not to insert the battery or memory card upside-down or
backward, as this could cause a malfunction.
2 Close the battery-chamber/
memory card slot cover.
• Lay the cover completely flat in the
direction indicated by the arrow (1), and
fully slide it in (2).
B Damage Caution
Sliding the cover while it is open may
damage the camera.
B Opening and Closing the Battery-chamber/Memory Card Slot Cover
Do not open and close the battery chamber/memory card slot cover in a sandy or
dusty environment or with wet hands. If the cover is closed without removing foreign
particles, water may seep inside the camera or the camera may become damaged.
• If foreign particles get inside the cover or camera, immediately remove them with a
blower or brush.
• If liquid such as water gets inside the cover or camera, immediately wipe it off with
a soft and dry cloth.
Insert the Battery and Memory Card
1
2
3
4
5
6
Battery latch Memory card slot
1
2