Filter
Top Products
12
Preparing for Shooting
5 Set the date and time,
and press flexible button
4 (O).
• Use JK to select a field and
then use HI to set the date
and time.
• Select the minute field and press
the flexible button 4 (O) to
confirm the setting.
• Press flexible button 3 (m) to display m in the monitor and enable daylight
saving time. To disable daylight saving time, press flexible button 3 (m)
again.
6 When the confirmation dialog is displayed, press flexible
button 3 (R Yes).
7 Use JK to select the
background image to be
displayed when a menu
or setting screen is
displayed, and press
flexible button 4 (O).
• The background selection
screen may not be displayed depending on your country or region. In this
case, proceed to step 8.
• To restore the default background image, press flexible button 3 (P ).
8 Confirm the waterproofing-
related message and press K.
• There are seven message screens.
• Waterproofing-related messages are
displayed in the following situations.
- When turning on and setting the camera
for the first time
- When setting the camera to Shoot
under water (A27) or Underwater face framing (A28)
- When turning the camera on after charging
YDM
201501
/
/
01
Date and time
hm
00 00
:
Menu background
Waterproong precautions