Filter
Top Products
Technical Notes
107
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service
representative.
Power, Display, Settings Issues
Troubleshooting
Problem Cause/Solution A
The camera is on but
does not respond.
Wait for recording to end.
If the problem persists, turn the camera off.
If the camera does not turn off, remove and
reinsert the battery or batteries or, if you are
using an AC adapter, disconnect and reconnect
the AC adapter.
Note that although any data currently being
recorded will be lost, data that have already
been recorded will not be affected by removing
or disconnecting the power source.
–
The camera cannot
be turned on.
The battery is exhausted. 7, 9, 100
The camera turns off
without warning.
• The camera automatically turns off to save
power (auto off function).
• The camera and battery may not work
properly at low temperatures.
• The inside of the camera has become hot.
Leave the camera off until the inside of the
camera has cooled, and then try turning it on
again.
15
100
–
The monitor is blank.
• The camera is off.
• The camera automatically turns off to save
power (auto off function).
• The flash lamp flashes while the flash is
charging. Wait until charging is complete.
• The camera is connected to a TV or computer.
11
15
–
–
The camera
becomes hot.
The camera may become hot when used for an
extended period of time to shoot movies or
when used in a hot environment; this is not a
malfunction.
–