Filter
Top Products
E36
Reference Section
2 Set the desired interval between
each shot.
• Use JK to select an item , and use HI to
set the time.
• Press the k button when setting is
complete.
3 Press the d button to display the shooting screen.
4 Press the shutter-release button to
shoot the first image.
• The shutter is automatically released at the
specified interval to shoot subsequent
images.
• The monitor turns off and the power-on lamp
flashes during the intervals between shots
(when the battery is used).
5 When the desired number of images have been taken,
press the shutter-release button.
• Shooting ends.
• Shooting ends automatically when the internal memory or memory card
becomes full.
B Notes About Interval Timer Shooting
• To prevent the camera from turning off unexpectedly during shooting, use a fully
charged battery.
• If the AC Adapter EH-62A (available separately; E81) is used, this camera can be
powered from an electrical outlet. Do not, under any circumstances, use an AC
adapter other than the EH-62A. Failure to observe this precaution could result in
overheating or damage to the camera.
• Do not rotate the mode dial to a different setting while performing interval timer
shooting.
• If the shutter speed is slow and saving an image takes time compared to the
specified interval, some of the shots during interval timer shooting may be
canceled.
30 00
Edit
sm
Intvl timer shooting
1/250
1/250
F5.6
F5.6
840
840
25m 0s
25m 0s
25m 0s