Filter
Top Products
40
Shooting Features
y M f Party/indoor
• To avoid the effects of camera shake, hold the camera steady. Set Vibration
reduction (A91) to Off in the setup menu when using a tripod to stabilize the
camera during shooting.
y M k Close-up
From the screen displayed after k Close-up is selected, select Noise reduction
burst or Single shot.
•Noise reduction burst: This enables you to shoot a sharp image with a
minimum of noise.
- Press the shutter-release button all the way to capture a series of images
which are combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still
until a still image is displayed. After taking an image, do not turn the camera
off before the monitor switches to the shooting screen.
- If the subject moves or there is a significant camera shake during continuous
shooting, the image may be distorted, overlapped, or blurred.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
•Single shot (default setting): Saves images with emphasized outlines and
contrast.
- One image is captured when the shutter-release button is pressed all the way.
• The focus mode (A61) setting is changed to D (macro close-up) and the
camera automatically zooms to the closest position at which it can focus.
• You can move the focus area. Press the k button, use the multi selector
HIJK or rotate it to move the focus area, and press the k button to apply
the setting.