Filter
Top Products
38
Shooting Features
s Night portrait
• Press the d button to select Y Hand-held or Z Tripod in Night portrait.
• One image is captured at a slow shutter speed. Compared to using Z Tripod,
when Y Hand-held is selected, the camera sets a slightly faster shutter speed
in accordance with the shooting conditions to prevent camera shake.
• Vibration reduction is disabled regardless of the Vibration reduction (A91)
setting in the setup menu.
• The flash always fires. Raise the flash before shooting.
c Landscape
• Press the d button to select Noise reduction burst or Single shot in
Landscape.
• Noise reduction burst: This enables you to shoot a sharp landscape with a
minimum of noise.
- Press the shutter-release button all the way to capture a series of images
which are combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still
until a still image is displayed. After taking an image, do not turn the camera
off before the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
•Single shot (default setting): Saves images with emphasized outlines and
contrast.
- One image is captured when the shutter-release button is pressed all the way.