Filter
Top Products
E93
The Setup Menu
Reference Section
C Power-on Lamp
The following chart explains power-on lamp status when the camera is connected to a computer.
Blink Warning
Specify whether or not the camera detects human subjects that blink when
shooting with face detection (A 65) in the following modes.
• G (easy auto) mode (A 36) or A (auto) mode (A 37).
• Portrait (A 42) or Night portrait (A 43) is selected for the scene mode.
B Note on Blink Warning
Blink detection does not function at continuous settings of Continuous H, Continuous L, BSS, or
Multi-shot 16.
Power-on lamp Description
Blinks slowly
(orange)
Battery charging.
Glows (green)
Battery not charging. Charging is complete when the power-on lamp stops
blinking orange and glows green.
Flickers (orange)
• The ambient temperature is not suited to charging. Charge the battery
indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F).
• A USB cable is not correctly connected or the battery is faulty. Reconnect
the USB cable correctly or replace the battery.
• Computer is in sleep mode and does not supply power. Reboot the
computer.
• The battery cannot be charged because the computer’s specifications or
settings do not support power supply to the camera.
d tab M z (setup menu) M d Blink warning
Option Description
On
When the camera detects that one or more human subjects
may have blinked in a picture taken using face detection, the
blink warning screen is displayed in the monitor.
The face of the human subject that may have blinked when
the shutter was released is framed by a yellow border. Should
this occur, check the picture and determine whether or not
another picture should be taken.
See “Operating the Blink Warning Screen” (E 94) for more
information.
Off (default setting) Blink warning is not enabled.