Filter
Top Products
E94
The Setup Menu
Reference Section
Operating the Blink Warning Screen
When the blink warning screen shown at right
is displayed in the monitor, the operations
described below are available.
If no operations are performed within a few
seconds, the camera automatically returns to
shooting mode.
Sequence Display Options
Choose the method used to display a series of pictures taken continuously
(sequence) (E 17) when viewing them in full-frame playback mode (A 30) and
in thumbnail playback mode (A 31).
Settings are applied to all sequences, and the setting is saved in the camera’s
memory even if the camera is turned off.
To Tap Description
Enlarge the detected
face that blinked
n
Tap n.
If the camera detects that more than one human
subject blinked, tap M or N to switch display to
another face.
Switch to full-frame
playback
o
Tap o.
Delete pictures
E
Tap E.
Switch to shooting
mode
I
Tap I. The shutter-release button can also be
pressed to return to shooting mode.
d tab M z (setup menu) M C Sequence display options
Option Description
Individual pictures
Set all pictures in all sequences to be displayed individually. F
is displayed on the playback screen (A 8).
Key picture only (default
setting)
Set all sequences to be displayed using their key pictures only.
Did someone blink?