Nikon COOLPIXS4300PLUMKIT Digital Camera User Manual


 
154
Setup Menu
Basic Camera Setup
w Electronic VR
Choose whether or not to use electronic VR (vibration reduction), which reduces
the effects of camera shake during shooting.
B Notes on Electronic Vibration Reduction
The effectiveness of electronic VR decreases as camera shake increases.
The pictures taken using electronic vibration reduction may be somewhat “grainy” in appearance.
Electronic VR does not function under the following conditions or in the following shooting
modes:
- When slow sync with red-eye reduction (A64, 65) is used
- When exposure exceeds a certain length of time
- When ISO sensitivity (A 53) is set to Auto
- When Blink proof (A77) is set to On in smart portrait mode
- In the following scene modes: Sports (A64), Night portrait (A 64), Dusk/dawn (A 66),
Night landscape (A66), Museum (A68), Fireworks show (A 68), and Backlighting
(A69)
The angle of view (the area captured in the recorded movie) is smaller when electronic VR is
enabled during movie recording.
Tap the bottom tab (A147) M Tap z (Setup menu) M w Electronic VR
Auto
When taking still pictures, electronic VR is enabled when R (A 10) is displayed in
the monitor and all of the conditions below are met.
The flash is turned off or set to slow sync mode.
A slow shutter speed is used.
Continuous is set to Single.
The subject is dark.
When recording movies, electronic VR is enabled at all times.
Off (default setting)
Electronic VR is disabled.