Filter
Top Products
73
Shooting Suited to Scenes (Scene Mode)
More on Shooting
5 Take the next picture.
Frame the next picture so that one-third of the
frame overlaps the previous picture and press
the shutter-release button.
Repeat this process until the necessary
number of pictures have been taken to
complete the scene.
6 Tap H when shooting is complete.
The camera returns to step 3.
B Notes on Panorama Assist
• Apply or adjust shooting settings (A 59) before releasing the shutter for the first picture.
Shooting settings cannot be changed after the first picture is taken. Pictures cannot be deleted,
nor can zoom operate after the first picture has been taken.
• Shooting for the panorama series is terminated if the auto off function (A 158) initiates standby
mode during shooting. Setting the time allowed to elapse before the auto off function is enabled
to a longer setting is recommended.
D R Indicator
In Panorama assist scene mode, exposure, white balance, and focus
for all pictures in a panorama are fixed at the values for the first
picture in each series.
When the first picture is taken, R is displayed to indicate that
exposure, white balance, and focus are locked.
D Panorama Maker5
Install Panorama Maker 5 from the supplied ViewNX 2 CD. Transfer pictures to a computer (A134)
and use Panorama Maker 5 (A 138) to join them in a single panorama.
D More Information
See “Image/Sound File and Folder Names” (A174) for more information.
22
22
22
19
19
19
22
22
22