Filter
Top Products
22
First Steps
Inserting Memory Cards
Recorded data are stored in the camera’s internal memory (approximately 79 MB)
or on removable Secure Digital (SD) memory cards (available separately; A 170).
If a memory card is inserted in the camera, data are automatically stored on
the memory card and data recorded to the memory card can be played back,
deleted or transferred. Remove the memory card to store data in the internal
memory, or play back, delete or transfer data from the internal memory.
1 Be sure that the power-on lamp and the
monitor are off and open the battery-
chamber/memory card slot cover.
Be sure to turn off the camera before opening the
battery-chamber/memory card slot cover.
2 Insert the memory card.
Slide the memory card in the correct orientation
shown at right until it clicks into place.
Close the battery-chamber/memory card slot
cover.
B Inserting Memory Cards
Inserting the memory card upside down or
backwards could damage the camera or the
memory card. Be sure that the memory card is in the
correct orientation.
Removing Memory Cards
Before removing memory cards, close the slide
cover to turn the camera off and be sure that the
power-on lamp and monitor are off. Open the
battery-chamber/memory card slot cover and
press the card in (
1
) to partially eject the card.
The card can then be removed by hand (
2
). Do
not attempt to remove the card at an angle.
• Note that the battery and memory card may
become hot during use; observe due caution when removing the memory card.