Filter
Top Products
120
l
1 Not available with spot metering.
2 Can also be selected with flash unit.
3 AA/A mode selection performed on flash unit using custom settings.
Unless
lens data have been provided using the Non-CPU lens data option in the
setup menu, “A” will be selected when a non-CPU lens is used.
4 Can only be selected with camera.
5 Unless lens data have been provided using the Non-CPU lens data option
in the setup menu, non-TTL auto (A) is used with non-CPU lenses, regardless
of mode selected with flash unit.
6 Available only in i-TTL, AA, A, GN, and M flash-control modes.
7 Availalbe only in i-TTL, AA, and A flash-control modes.
8 Firmware updates for the SB-910 and SB-900 can be performed from the
camera.
A Modeling Illumination
CLS-compatible flash units such as the SB-910, SB-900, SB-800, SB-700,
and SB-600 emit a modeling flash when the camera Pv button is
pressed. This feature can be used with Advanced Wireless Lighting to
preview the total lighting effect achieved with multiple flash units.
Modeling illumination can be turned off using Custom Setting e5
Modeling flash (0 259).