Filter
Top Products
E39
Reference Section
Set Time zone and date (E98) correctly before using the location data
functions.
1 Set Record location data to On.
• After the settings are complete, press the
d button or shutter-release button to exit
the menu.
• To receive signals easily, operate in an open-
air area.
2 Check the location data
reception on the shooting
screen.
• n or o: Signals are being received
from four or more satellites, or from
three satellites, and positioning is
being performed. The location data is
recorded on the image.
• z: Signals are being received, but
positioning is not possible. If the location data was obtained within the last
one minute, it is recorded on the image.
• y: Signals are not received. The location data is not recorded on the image.
3 Shoot images while positioning is being performed.
• The location data is recorded on shot images.
• The recorded location data can be checked on a map with ViewNX-i after
transferring the image to a computer (E53).
Recording the Location Data on the Image
Press the d button M z menu icon M Location data options M k
button
O
On
Record location data
m
m
0
0
s
s
F5.6
F5.6
840
840
25
25
m
m
0
0
s
s
F5.6
F5.6
1/250
1/250
Location data reception